Lotus RDA Clone Review

The Lotus clone is a rebuildable dripping atomizer, and also happens to be one of the most unusual atomizers currently available. It features a very noticeable brass airflow ring. The airflow is only on one side, however there is additional optional bottom airflow you can enable as well – something… Read Full Article

Aqua Rebuildable Atomizer Clone Review

This is a review that is a long time overdue. I’ve had my Aqua for a long time now and have really had a good opportunity to try out a lot of different builds and get a good feel for it. The Aqua is a rebuildable atomizer. It is probably… Read Full Article

Stillare Clone Review

Out of all the atomizers that have come out this year, the Stillare was probably the one I was anticipating the most.  I have had this little guy for about 2 months now, and during that time it has been my most used RDA – not a small feat considering… Read Full Article

TOBH Clone Review

This is a review of the TOBH clone from Fasttech. Before going any further, it’s important to note that this review is for this exact TOBH clone. There are a variety of TOBH clones out there right now and there are very likely different iterations from different manufacturers, so anything said… Read Full Article

CATS RDA Clone – Version 1 Review

Before we go any further, it’s important to note that this review is specifically for this product. There are multiple clones of this RDA and they are very different, so this review will not apply to any version other than this one. This was the first CATs clone I saw… Read Full Article

Helio/Helios Clone Review: Round 3

This is now the third Helio/Helios clone from Fasttech that I’ve reviewed. The first one was a total bust, as the adjustable airflow actually didn’t work at all. The second one had a working airflow band, but all 3 holes were exactly the same size, making it kind of pointless.… Read Full Article

3D Clone – Nemeis Hybrid Dripper Review

Ok, it’s been a couple weeks since I gave you my tutorial on how to coil your 3D, now it’s time for the review. I already kind of went over how this works in the tutorial, but I’ll give you a quick refresher on it. The 3D is a dripping… Read Full Article

V7 Rebuildable Dripping Atomizer Review

Today we’re going to take a look at the atomizer I have been using the absolute hell out of for the last month or two. It’s simple, it looks cool, it doesn’t have a lot of bells and whistles, but it works like a dream – and of course, the… Read Full Article

Crown RDA Clone Review

Today we’re going to be taking a look at the Crown RDA clone. I was so excited to get this one that I couldn’t wait for FT to get a hold of it and I had to pick it up on eBay. I went with the one made by Yeahsmo,… Read Full Article

Taifun GT Review

Ok, today I’m finally buckling down and writing a much needed review of the Taifun GT clone. My experience with Taifuns is an interesting one. I first picked one up on Fasttech months ago. At the time, I could not get it to work – for whatever reason the chamber… Read Full Article

Kraken Rebuildable Atomizer Review

This review has been a long time coming. I’ve had my Kraken for several months now and have had a chance to try out a variety of builds on it. While genesis style atomizers generally aren’t my favorite, they do have their place, and the Kraken is one of the… Read Full Article

Patriot RDA Clone Review

OK. I’ve been mulling this one over for a while now. At first I was kind of disappointed in the Patriot. At the time, I was already inundated with similar RDAs and this particular piece really isn’t a hell of a lot different than your standard RDA. It’s got a… Read Full Article

Immortalizer Clone Review

So this is my second Immortalizer review. My first Immortalizer review was for the real thing. Today I am taking a look at the clone. It’s important to note that I am reviewing this specific Immortalizer, as there are more than 1 clone out there from various manufacturers. Now as… Read Full Article

Foggy Nimbus Review

Today we’re going to take a look at the Foggy Nimbus clone from Fasttech. You can see it pictured above on my custom DNA30 mod, and I published a tutorial last week showing how I like to coil it to run on a DNA30. Nothing earth shattering there. This was… Read Full Article

Fatty V3 Clone Review

Ok… You’ve heard me talk plenty about how much I like my Fatty V3 clone. Now it’s time for the full review. I’ve had this fat little guy for a while now. When I first got it, I immediately noticed that the airflow ring was incredibly loose. I vaped it… Read Full Article

Vortex RDA Review

Finally time for me to do a proper review of the Vortex… I’ve had this atty for a while now. I was intrigued by it because it’s kind of similar to your standard drippers – Igo-L, Nimbus, etc. The difference is it has the nice windows and kind of a… Read Full Article


I’ve had my AIOS since mid to late October,  and it wasn’t exactly love at first sight for me.  Of course, manual dripper mode is pretty straightforward and easy to set up, but not knowing how to correctly get it to work in tank mode kept tugging at the back… Read Full Article

The Fogger V2 – Does it Live Up to the Hype?

I was probably more excited to get the Fogger in the mail than I was for any other piece I’ve recently ordered. I instantly cracked it open and got to work setting up a nice coil. And that’s when all the fun began… Let’s step back just a minute and… Read Full Article

Steam Turbine Clone: Hot or Not?

Ok, so I’ve had the Steam Turbine Clone for about a month or two now and it’s finally time to get dirty and really explore this thing. I got my Steam Turbine clone from Fasttech for around $15  just about the same time I also got the Steamboy clone, also… Read Full Article

IGO-W Review

So after whipping up my sweet dragon coil tutorial for the IGO-W, I decided it was about time I got around to reviewing this thing. Really, I use the IGO-L a lot more than I use the IGO-W, but the only real reason is because I like the appearance of… Read Full Article

Helio V2 Clone Review: Still a Piece of Shit

So being the huge glutton for punishment that I am, I couldn’t resist trying the upgraded Helio clone, despite the fact that the first one literally didn’t work at all. The V2 clone is bigger, has a nice dual coil setup and features an actual WORKING airflow control ring. Unfortunately,… Read Full Article

Helio V1 Clone Review: The Worst

So I got this little guy a while back now. The Helio V1 is the one on the left in the Pic above, the one on the right is the V2. I read the reviews on it before buying it – the reviews weren’t good, but for some reason I… Read Full Article

X1 Rebuildable Dripping Atomizer Review

I’ve had this little bad boy – pictured above – for a long time.  In fact at one point I thought it was even a good idea to pick up two more of these, so I am now blessed with 3. The X-1 is an aluminum RDA – rebuildable dripping… Read Full Article

YK1-KTS RDA – Small Package, Big Clouds

Shitty name, right? I’ve heard this called a cyclone clone. It looks a lot like the cyclone or the Smoktek Scar, although it only has 2 posts, not 3. I’ve actually had the YK1-KTS for a long time. In fact I have 2 of them and I have used both… Read Full Article

Steamboy Clone Review

I’ve had my Steamboy clone for about a week now, and have been using it as my primary vape. If you’re interested, you can pick one up on Fasttech for $20.99 shipped. So this is a genesis style rebuildable atomizer. That means it has a deck above the tank for… Read Full Article

Nimbus Clone Review

  So the Nimbus, or the V5 RDA as Fasttech calls it, is one of the first RDA’s I ever used. I got my first one months ago. At first, I couldn’t figure out how the hell to remove the top cap, and left it in my box for about… Read Full Article

Fasttech Mini Rebuildable RDA Review

So a while back I tacked one of these mini RDAs from Fasttech on to one of my orders just for shits. I’m not super crazy for the way they look, but I thought it couldn’t hurt to give one a try anyway. They are super cheap-  you can pick… Read Full Article